Double acting oscillating cylinder steam engine

by dorsey

Show more

Models & Trains

What's your vote?


Raw materials:  drill rod, C360 brass, and cast iron bar.

Raw materials: drill rod, C360 brass, and cast iron bar.


Sorry that this is a little blurry, but you get the idea.  This shows the pillow blocks, rotating assembly and the stuffing box.

Sorry that this is a little blurry, but you get the idea. This shows the pillow blocks, rotating assembly and the stuffing box.



http://www.makemania.com/widwimg/332/274/b_DSC00031_305x230.jpg
Raw materials:  drill rod, C360 brass, and cast iron bar.
http://www.makemania.com/widwimg/332/274/b_DSC00037_305x230.jpg
Cylinder with trunnion holes.
http://www.makemania.com/widwimg/332/274/b_DSC00038_305x230.jpg
Trunnions in place ready for silver soldering.
http://www.makemania.com/widwimg/332/274/a_DSC00069_305x230.jpg
Sorry that this is a little blurry, but you get the idea.  This shows the pillow blocks, rotating assembly and the stuffing box.
http://www.makemania.com/widwimg/332/274/a_DSC00070_305x230.jpg
Haven't painted the flywheel yet, but this shows the broached keyway.
http://www.makemania.com/widwimg/332/274/a_DSC00071_305x230.jpg
Showing the side plate with trunnion nut,, pedestal, and platform.
http://www.makemania.com/widwimg/332/274/a_DSC00073_305x230.jpg
Detail of pedestal.  In retrospect, I should have made them a little wider to fully enclose the hold-down bolts.
Description

Inspired by a book on making small steam engines, I did further research and developed plans and a parts list.

Supplies
Add a Comment