Baffles for megaphone exhaust

by dorsey

Show more

Autos

What's your vote?


Semi-finished parts, still need shaping and fit-up: baffle tubes, flanges, and internal spacers. Three pieces per baffle.
Click to enlarge click to enlarge


Semi-finished parts, still need shaping and fit-up: baffle tubes, flanges, and internal spacers. Three pieces per baffle.


Engine compartment showing Sanderson Lakester™ header with megaphone.
Click to enlarge click to enlarge


Engine compartment showing Sanderson Lakester™ header with megaphone.



http://www.makemania.com/widwimg/332/277/b_DSC00090_305x230.jpg
Semi-finished parts, still need shaping and fit-up: baffle tubes, flanges, and internal spacers. Three pieces per baffle.
http://www.makemania.com/widwimg/332/277/b_DSC00092_305x230.jpg
Rough fit-up to confirm baffle tube diameter.
http://www.makemania.com/widwimg/332/277/b_DSC00093_305x230.jpg
Final fit of the flange to the baffle tube before welding.
http://www.makemania.com/widwimg/332/277/a_DSC00033_305x230.jpg
Engine compartment showing Sanderson Lakester™ header with megaphone.
http://www.makemania.com/widwimg/332/277/a_DSC00001_305x230.jpg
Finished baffle bolted in place ready to testing. I didn't bother removing the underbody muffler connection because very little exhaust will route that way with the baffle in place rather than the block-off plate.
View project details
Share URL
Favorite It
Learn it
Tweet it
Post it

Featured Projects