Show more

Models & Trains

What's your vote?


Raw materials:  drill rod, C360 brass, and cast iron bar.

Raw materials: drill rod, C360 brass, and cast iron bar.


Sorry that this is a little blurry, but you get the idea.  This shows the pillow blocks, rotating assembly and the stuffing box.

Sorry that this is a little blurry, but you get the idea. This shows the pillow blocks, rotating assembly and the stuffing box.



http://www.makemania.com/widwimg/332/274/b_DSC00031_305x230.jpg
Raw materials:  drill rod, C360 brass, and cast iron bar.
http://www.makemania.com/widwimg/332/274/b_DSC00037_305x230.jpg
Cylinder with trunnion holes.
http://www.makemania.com/widwimg/332/274/b_DSC00038_305x230.jpg
Trunnions in place ready for silver soldering.
http://www.makemania.com/widwimg/332/274/a_DSC00069_305x230.jpg
Sorry that this is a little blurry, but you get the idea.  This shows the pillow blocks, rotating assembly and the stuffing box.
http://www.makemania.com/widwimg/332/274/a_DSC00070_305x230.jpg
Haven't painted the flywheel yet, but this shows the broached keyway.
http://www.makemania.com/widwimg/332/274/a_DSC00071_305x230.jpg
Showing the side plate with trunnion nut,, pedestal, and platform.
http://www.makemania.com/widwimg/332/274/a_DSC00073_305x230.jpg
Detail of pedestal.  In retrospect, I should have made them a little wider to fully enclose the hold-down bolts.

Featured Projects

Part 2 - How To Look For American & Chinese Drywall Problems

by BBrincku  in Home

Repaving the Road in West Orange, NJ

by ocean  in Other

creative journal


Subwoofer built in cabinet

by 32Tudor  in Autos

New Homey Dining Room

by lprice9  in Home

From trash to treasure!

by betsymck  in Home

Rotator Cuff Repair

by surfdog  in Health

70 Chevelle Wagon

by 32Tudor  in Autos

Soldering Glass Tiles and Wire